HITCH FIT GUIDE



Standard Measurement

Standard Measurement

  • Measure the distance from the center of hitch pin hole to the outer edge of your bumper.
  • This measurement must be less than the measurements found in the chart below.


Spare Tire Measurement

Spare Tire Measurement

  • If you have a spare tire, measure the distance from the center of the hitch pin hole to outer edge of your spare tire.
  • This measurement must be less than the measurements found in the chart below.


Before making a rack selection, find out which receiver classes are available for your vehicle.

Hitch Class Compatibility

  Receiver Tube Size Max Tounge Weight (lbs) Bones 2 Bones 3 Bones 4 Glide EX 2 Glide EX 4 Glide EX 5 All-Star Freedom 2 Freedom EX 2 Freedom 4 SuperClamp 2 SuperClamp EX 2 SuperClamp 4 SuperClamp EX 4 MTR 1 MTR 1+1 MTR 1+2 MTR 2 MTR 2+1 MTR 2+2

Hitch Class: I

1 1/4 200

Hitch Class: II

1 1/4 350

Hitch Class: III

2 800 All Saris car racks are compatable with Hitch Class III

Hitch Class: IV

2 1,000 - 1,200 All Saris car racks are compatable with Hitch Class IV

Hitch Class: V

2 1/2 1,600 - 1,200 At this time Saris car racks are not compatable with Hitch Class V


Tray Style Racks

Mast/Hanging Style Racks

  All-Star Thelma SuperClamp 2 SuperClamp 4 Freedom 2 Freedom 4 SuperClamp EX 2 Freedom EX 2 SuperClamp EX 4 MTR Glide Porter Bones Hitch Axis Aluminum

Measurement A

Hitch pin to first contact
5" 8.5" 12" 12" 12" 14" 8.25" 8.25" 12" 6.75" 9.5" 11.5" 9.5" 9"

Measurement B

Hitch pin to first contact (tilted)
N/A 6.5" N/A 6" N/A 10" 7.25" 11.25" 6" 6" N/A N/A N/A N/A



Measurement A

The measurement of the rack from the center of the hitch pin hole to the first contact point on the rack.

Hitch Fit Measurement A


Measurement B

The measurement of the rack when tilted for storage.

Hitch Fit Measurement B